en
cz

Software Merbon Visual


Firmware upgrade instruction:

It is possible to upload new version of HT200 application from web browser on the device IP address (the browser PC must be in the same network). To access the service web, enter the password. In section Device management -> New application and web on device choose file „HT200.sh“ (file name must be „HT200.sh“). HT200 will be restarted automatically.

Notice

Do not switch off power supply during firmware upgrade!


Update from Merbon Menu Reader to Merbon Visual

Firmware upgrade instruction:

It is possible to upload new version of HT200 application from web browser on the device IP address (the browser PC must be in the same network). To access the service web, enter the password. In section Device management -> New application and web on device choose file „WEB_Upgrade.tar.gz“. HT200 needs to be restarted after this upgrade and the browser needs to be closed and opened again as well. Upgraded web can be found on the IP address of the HT200. This web can be used only to upload „HT200.sh“ file. Device will restart itself after this upgrade. The webpage should be refreshed automatically.

Notice

Do not switch off power supply during firmware upgrade!


Merbon Visual – mobile app

The mobile version of Merbon Visual is free to download on Google Play ana App store.

 

Merbon Visual – iPC Industrial Computer

The installer includes the Merbon Visual application for industrial iPCs with the Windows operating system for visualizing the user interface. The application is fully compatible with PLCs with both Merbon RT and SoftPLC RT.