R090 – Modbus TCP/DALI converter
R090_WEB.ZIP
Please, do not switch off power supply during firmware upgrade. It is possible to upload new version of R090 application from web browser on the device IP address (the browser PC must be in the same network). If there is problem with web connection to the device, please check that WEB DIP switch is at OFF position. If ON at power on the web a FTP access is disabled.
Applicable for upgraded firmware v1.0.0 and newer:
1. open the web page of the R090, go to Administration, and upload the new firmware file (R090_fw_x_x_x.bin)
2. power off / on the R090
3. connect to the R090 over FTP (name / password: root / root99)
4. delete all web pages which are in the R090
5. copy the new web pages from your PC to the R090
6. disconnect the FTP server
7. power off / on the R090
Applicable for upgraded firmware older than v1.0.0 (RC – release candidate versions):
1. open the web page of the R090, go to Administration, and upload the new firmware file (R090_fw_x_x_x.bin)
2. set the INIT switch at R090 to ON
3. power off / on the R090
4. the IP address of R090 is 192.168.1.99 now
5. go to the R090 web pages, Conf
6. click the Write button
7. connect to the R090 over FTP (name / password: root / root99)
8. delete all web pages which are in the R090
9. copy the new web pages from your PC to the R090
10. disconnect the FTP server
11. set the INIT switch to OFF
12. power off / on the R090
13. set the new IP address of the module, and all other settings.
Release notes:
Version 1.0.5
- support for new HW version added
Version 1.0.4
- fix of ballast address range on page „Group configuration“. Range is now 0-63
- fix of „double sending“ of commands and fix of register 4 function
Version 1.0.1
- fixed Modbus TCP server, now it is supported any Modbus address.
Version 1.0.0 (changes in release candidate versions)
- setting default address/group to 1
- settings scene light intensity in percentage according to DALI specification
- changed meaning permission / prohibition DIP switch WEB. Now if ON at power on the web a FTP access is disabled
- fixed address settings on web pages (0-63)
- fixed light intensity settings on web pages (0-254)
- fixed scene configuration on web pages
