M-Bus drivers

In Merbon, any type of meter can be imported using detection of real devices on the M-Bus; see here.

List of supported meters in SoftPLC is below. It is possible to add other models on request, or they can be integrated directly into IDE using DIF and VIF adressing.

• ABB DCM 13000
• ABB Delta
• ABB F2
• Actaris +M
• Actaris Cyble 1.4
• Actaris MAXX
• AEW21
• CF50
• CF-ECHO 2 Cooling
• CF-ECHO 2
• Danfoss Sonometr 1100
• EESA MT500
• ELSTER TMP-A
• EMMOD206
• EMU32
• Enbra Wehrle
• Inepro PRO
• ISTA
• ITRON CF UltraMaxx V
• Kamstrup Multical401
• Kamstrup Multical402
• KMB PA144
• Moeller KWZ-3PHD
• Multical 66
• Multical601
• NEMO96HD/HD+
• NZR DHZ 5/63 (Firmware 1.10)
• NZR DHZ 5/63 (Firmware 1.11)
• PadPuls
• Pollucom E
• Residia-M
• Sensonic 2
• Sensonic
• SensoStar2 (2xPC)
• Sensus HRI
• Sensus Pollustat E
• Sharky 775 V.2
• Sharky 775
• Schneider IEM3235
• Schrack DIZ
• Schrack EIZ
• Schrack MIZ
• Siemens WFH21
• Sitrans FUE 950
• Sonometer 1100
• Sontex 539
• Supercal 531 V3.X
• Supercal 539
• SVM F4 Rev.30
• SVM F4
• T230
• Techem Ultra S3
• UH-50
• UltraHeat 2WR5
• VFN21
• WFN21 (Block 1 and 4)
• Zenner MultiData
• Zenner MultiPulse
• Zenner S1