en
cz

R091 – converter Modbus TCP/DALI

Current version:

R091_v118.bin

Attention - do not disconnect the device from the power supply during the firmware update. The update of the device is possible via the web interface of the device (after entering the IP address of the device into a web browser).

FW version notes:

Version 1.1.8 
- support for new mcu 

Version 1.1.7
- extend timeout for rersponse packet
- extend tolerance of received packet 

Version 1.1.6 
- changed status in modbus regs: for status bits of ballast and state of operation
- added repeated random address generation at end of ballast readdressing  

Version 1.1.5
- the ability to password protect the site added

Version 1.1.4
- extension of the DALI packet reception time if the DALI line is busy

Version 1.1.3
- update to fnet V4.6.3
- modifications increasing the stability of the function of the converter and its web server

Version 1.1.2
- modifications increasing the reliability of DALI communication

Version 1.1.1
- description of communication via telnet

Version 1.1.0
- modifications increasing the reliability of DALI communication

Version 1.0.9
- modification increasing reliability when addressing DALI ballasts
- modifications to improve telnet functionality

Version 1.0.8
- fixed total readdressing triggered by the cmd block

Version 1.0.7
- web server apperance change

Version 1.0.6
- support for modbus function F23 added – multiple read multiple write registers
- structural changes

Version 1.0.5
- freertos v10 update
- seek function repair in mikrofs (cache)
- seek function repair in ROM FS
- fnet 4.6.2 update
- module ID fix

Version 1.0.4
- repair of NVRAM validity check